CAOS Hammock in blue and grey.

The CAOS Hammock is strong and lightweight, made from 85GSM 210T parachute nylon with 300kg load rating.

This parachute hammock is both comfortable with its smooth material, it is exceptionally light due to the nature of the material, and folds up and fits in the smallest area. CAOS Hammocks are made of super-strong, lightweight, soft, breathable and mildew-resistant nylon cloth, built to last a long time and adventure anywhere! Quick and easy to install and pack away in seconds.

Can be installed anywhere that you have two safe anchoring points to form an attachment - on a balcony, in the bush or just between to 4 wheel drives on the beach; anywhere, anytime.

Features:

• 210T - 85GSM parachute nylon material with triple stitch connections.

• 300kg tensile strength.

• Packs away conveniently into the built-in carrybag that you can never lose… Wow!

• Carabiners make quick work of installation.

• 8mm thick double braided black paracord polyester design provides strength for the attachment.

CAOS Bow Shackle, Hitch Receiver and Pin Set.

Convert your standard 50mm x 50mm square towbar hitch into a rated recovery point by simply removing your towbar tongue and replacing it with this hitch. 

Suitable for a snatch or winch recovery situation and perfect for those vehicles who have trouble mounting rear recovery points.

You should never, ever use a tow ball for recovery purposes as they are not rated for the loads applied when performing vehicle recovery

This Recovery hitch will replace the tow ball and is rated for the job!

Features:

• Machined steel hitch receiver with 5 Tonne / 5000kgs working load limit.

• Corrosion resistant powder coated or zinc plated parts.

• Moulded plastic bow shackle protector.

• Twin mounting holes for vertical or horizontal mounting depending on recovery angle.

• Designed to suit most standard 50mm x 50mm heavy duty towbars.

• Complete assembly.

WARNING!! Never use a tow ball for recovery purposes. 

Note: The distance between the milled shoulder beside the eye and the centre of the pin hole = 76mm; the length of the square part of the receiver that inserts into the towbar = 104mm. Please check that this item will fit your towbar before ordering.

Hard Korr XD-G3 550mm (22") Single Row LED Light Bar

The XDS500-G3 packs a powerful punch for its size. Boasting distance of 1 lux @ 401m from a slimline housing (just 50mm high) and a wide, even combination beam with no ‘black spots’, it can mount unobtrusively to any bull bar or under a roof rack.

Features:

• Sliding & end-mount legs: for ultimate mounting versatility
• Oversized heatsink: helps LEDs remain cooler and brighter
• Rubber seal: custom molded seal helps ensures 100% waterproofness
• Ultimate reliability: Design ensures that damage to part of the light will not cause total failure
• Long useful life: 100+ lumen per watt LEDs with over 50,000 hours useful life
• IP69K ingress rating: protected against complete, continuous submersion in water as well as high-pressure water jets
• Uses less power: Patented hybrid reflector lens achieves 94%+ efficiency
• Shatterproof lens: Lexan polycarbonate lens is unbreakable, abrasion-resistant and optically clear
• Military-style breather
• Positively sealed light enclosure: bolts placed every 6cm for a positively sealed enclosure.

Specifications:

• Materials Aircraft aluminium housing Shatterproof Lexan lens
• LED Manufacturer OSRAM® (spot) &CREE® (flood)
• LED Number 12 x 3w OSRAM & 6 x 10w CREE
• Output 9,600 RAW lumens
• Lux 1 lux @ 503m
• Beam distance 1,006m
• Beam GEN3 Hybrid (spot & Flood)
• Ingress Protection IP68K
• Weight 3.0kg
• Working Voltage 11 – 38v DC
• Current 12v/5.5A – 24v/2.75A
• Colour Temp 5500K
• Lifespan 50,000 hours
• Model XDS400-G3

Pack Contents:

• 1 x 96w LED light bar
• 1 x set of end-mount legs
• 1 x set of under-mount sliding legs
• 1 x male and female Deutsch plug connectors

MAXTRAX presents the INDEFLATE, a device that is used to inflate or deflate two tyres simultaneously and equalises the pressure between the two automatically.

Inflating and deflating tyres can really be a tedious process. The task of deflating tyres one-by-one, without knowing exactly what your tyre pressure is, is made into a quick and simple task with INDEFLATE.

The MAXTRAX INDEFLATE attaches to two points (2 tyres) at once, equalising automatically, and has a unique dump valve system that allows you to deflate two tyres at once.

Using the MAXTRAX INDEFLATE you can attach a compressor and inflate two tyres, equally, at once. 

Features:

• MAXTRAX INDEFLATE has a built in pressure gauge, which means that you can monitor your tyre pressure while inflating, deflating, or simply equalising.
• MAXTRAX INDEFLATE is made from highly durable precision engineering aluminium and comes with two 3m highly flexible air hoses that are abrasion and ozone resistant.
• Clip on chucks make it simple and safe to connect to tyre valves.

MAXTRAX INDEFLATE comes in a strong and durable carry bag to make it convenient to carry and store.

Quick and Easy MAXTRAX XTREME Replacement Teeth Set.

The MAXTRAX XTREME REPLACEMENT TEETH SET includes 22 anodised alloy teeth to suit MAXTRAX X Series 4WD Recovery Tracks (not compatible with MAXTRAX MKII), plus a soft bag to store the replacement teeth. All of the teeth on the MAXTRAX X Series 4WD Recovery Tracks are the same shape and size, so you can replace any damaged tooth with any of these replacement teeth; a quick and easy task using MAXTRAX XTRACT INSERT TOOL (sold separately).

Items included are:

• 22 x Anodised alloy replacement teeth
• 1 x Soft bag to store the replacement teeth

Note: This product is not compatible with MAXTRAX MKII Recovery Tracks.

Voltage Meter Connector, 50Amp

Features:

• Provides live voltage reading via Smart-Touch LCD Display
• Reading appears with Touch & turns off 'Automatically after 30 seconds'
• Ideal for 4x4, Camping, Caravan, Marine & Solar applications
• Waterproof LCD display (IP67 Rated)
• Voltage: 12V DC at 50Amps
• Suits Cable Size: 8B&S (8mm)
• Pin Material: Nickel Plated Copper

22 peice Socket set in handy carry case

15-Socket(6pt):10,11,12,13,14,15,16,17,18,19,22,24,27,30,32mm
1-Ratchet Handle 45T
1-Universal Joint
2-Extension Bar 5" 10"
2-Spark plug socket 16 21mm
1-3 way adapter: 3/8"F×1/2"M
1pcs-blow mould case

13pc Impact Driver Set Impact-Action drives the bit into the head of the slot or Phillips Head as it applies reverse torque to break free seized and/or rusted fasteners.

High-Impact force helps prevent rounding out of fastener heads. Ideal for Brake rotors with retaining screws.

Features:

• Impact Driver
• 4 x Slotted Bits - 5mm, 6mm, 8mm and 9mm
• 4 x Phillips Bits - #1, #2, #3 & #4
• 4 x Inhex Bits - 4mm, 5mm, 6mm, 8.5mm, 17mm, 18mm, 19mm, 21mmm, 22mm and 24mm
• Impact Sockets
• Overall length: 36mm