Ultima 180 L.E.D Driving Light

9-33 Volt High Powered LED Driving light - 12,000 Lumens. A break through in LED driving light design and performance. Made at 180mm OD to fit the widest range of Bull Bar applications possible whilst maintaining power and beam penetration for both 4WD but also transportation markets where distance and light volume are vital requirements for safe driving.

Engineered for Performance

Class leading hybrid beam pattern combines volume for off-road 4WD use and long range performance for transport.

Super powerful 5 watt XP-G2 Cree L.E.Ds produce 120 watts of pure white light (5700øK). Extraordinary volumes of broad penetrating light of 12,000 raw lumens (6,795 effective lumens). Highly polished super-efficient aluminium metallized reflector utilising precisely scalloped parabolas for ultimate control and performance.

Engineered for Versatility

• Unique tool-free vertical adjustment affords quick on-the-fly beam correction via ergonomic aluminium adjuster knob 
• Multi-slot 3-bolt mounting options ensures suitability for all bull bar and nudge bar makes and models
• Superior mounting bracketry suspension system utilises polymer rubber to suspend the lamp making it impervious to shock and vibration

Engineered for Durability

• Constructed from light weight super strong Pressure Die Cast Aluminium uncompromised strength and rugged durability
• Built-in Active Thermal Management System (ATMS) enables the Ultima 180 to run harder for longer
• Fully sealed against water and dust ingress (IP66 & IP67) utilising a genuine Nitto breather vent and integrated DT connector
• Virtually unbreakable hard coated polycarbonate lens and lens protector.

Technical Information:

• Input voltage range 9-33v 
• Current draw 8.9a at 12v 
• Power 120w 
• LEDs 24x 5w CREE xp-g2 LEDs 
• Lumens 12,000 raw / 6,795 effective 
• LP rating IP66 & IP67 
• Operating temperature -40øc to 65øc 
• Colour temperature 5700øk 
• Size 180mm 
• Weight 1.75kg 

Product Comprises of:

• 1x Hybrid Beam L.E.D Driving Light
• 1x Hard Coated Polycarbonate Lens Protector
• 1x Stainless Steel Mounting Hardware Kit
• 4x Interchangeable Trim Pieces (Blue Black Red & Yellow)
• 1x Cable with Pre-Wired DT Connector
• 1x Fitting Instruction Booklet

Class Leading Performance

• The very latest in Cree® XHP50.2 L.E.D chip sets produce an extremely efficient yet powerful white light output (5000°K)
• High colour rendering index (CRI 70) improves visibility with reduced glare, increased clarity and better depth perception
• Ultra-low current draw places minimal strain on a vehicle’s electrical system

Striking Appearance, Built to Endure

• Outstanding performance matched to a sophisticated and stylised European design to enhance a vehicle’s appearance
• Built-in ‘Active Thermal Management System’ (ATMS) enables the lamp to run harder for longer
• Proven heavy duty multi-position bracket offering multiple mounting positions to guarantee the perfect fit
• Fully sealed against water and dust ingress (IP67) and utilising an integrated DT Connector for a secure power connection
• Internal heatsink directs heat build-up out via reflector vents to eliminate chances of fog

Technical Information:

• Input Voltage Range 9-33V
• Current Draw 4.6A at 12V
• Power 45 Watts
• LEDs 3x 15W XHP50.2 Cree® L.E.Ds
• Lumens 5,700 Raw / 2,500 Effective
• LP Rating IP67
• Operating Temperature -10°C to 65°C
• Colour Temperature 5000°K
• Size 225mm dia.
• Weight 2.2kg
• ECE ECE R10
• Other Active Thermal Management System (ATMS)
• Other 1 Lux at 800m

Class Leading Performance

• The very latest in Cree® XHP50.2 L.E.D chip sets produce an extremely efficient yet powerful white light output (5000°K)
• High colour rendering index (CRI 70) improves visibility with reduced glare, increased clarity and better depth perception
• Ultra-low current draw places minimal strain on a vehicles electrical system

Striking Appearance, Built to Endure

• Outstanding performance matched to a sophisticated and stylised European design to enhance a vehicles appearance
• Built-in Active Thermal Management System (ATMS) enables the lamp to run harder for longer
• Proven heavy duty multi-position bracket offering multiple mounting positions to guarantee the perfect fit
• Fully sealed against water and dust ingress (IP67) and utilising an integrated DT Connector for a secure power connection
• Internal heatsink directs heat build-up out via reflector vents to eliminate chances of fog

Technical Information:

• Input Voltage Range 9-33V
• Current Draw 4.6A at 12V
• Power 45 Watts
• LEDs 3x 15W XHP50.2 Cree® L.E.Ds
• Lumens 5,700 Raw / 2,500 Effective
• LP Rating IP67
• Operating Temperature -10°C to 65°C
• Colour Temperature 5000°K
• Size 22mm dia.
• Weight 2.2kgs
• ECE ECE R10
• Other Active Thermal Management System (ATMS)
• Other 1 LUX at 640m

Ultima 175 L.E.D Pencil Beam Driving Light

9-33V Enhanced Optic Driving Light - 3800 Lumens. Premium styled driving lights utilising the latest in enhanced free form 'Optic Drive™' L.E.D technology to capture and harness the light output for maximum performance. Specifically designed to endure the harshest Australian conditions, they produce a H.I.D like output with all the benefits of L.E.D. The Enhanced Optic range transform everyday 4x4s and SUVs into luxurious escape vehicles

Class Leading Performance

• The very latest in Cree® XHP50.2 L.E.D chip sets produce an extremely efficient yet powerful white light output (5000°K)
• High colour rendering index (CRI 70) improves visibility with reduced glare, increased clarity and better depth perception
• Ultra-low current draw places minimal strain on a vehicles electrical system

Striking Appearance, Built to Endure

• Outstanding performance matched to a sophisticated and stylised European design to enhance a vehicles appearance
• Built-in Active Thermal Management System (ATMS) enables the lamp to run harder for longer
• Proven heavy duty multi-position bracket offering multiple mounting positions to guarantee the perfect fit
• Fully sealed against water and dust ingress (IP67) and utilising an integrated DT Connector for a secure power connection
• Internal heatsink directs heat build-up out via reflector vents to eliminate chances of fog

Technical Information

• Input voltage range        9-33v
• Current draw     3a at 12v
• Power   30 watts
• LEDs    2x 15wxhp50.2 CREE® LEDs
• Lumens 3,800 raw / 1,663 effective
• LP rating           IP67
• Operating temperature   -10°c to 65°c
• Colour temperature        5000°k
• Size      175mm dia.
• Weight  1.1kg
• ECE     ECE r10
• Other    active thermal management system (atms)
• Other    1 lux at 680m

Ultima 175 L.E.D Combination Driving Light Kit

9-33V Enhanced Optic Driving Lights - 3800 Lumens ea. Premium styled driving lights utilising the latest in enhanced free form 'Optic Drive™' L.E.D technology to capture and harness the light output for maximum performance. Specifically designed to endure the harshest Australian conditions, they produce a H.I.D like output with all the benefits of L.E.D. The Enhanced Optic range transform everyday 4x4s and SUVs into luxurious escape vehicles.

Class Leading Performance

• The very latest in Cree® XHP50.2 L.E.D chip sets produce an extremely efficient yet powerful white light output (5000°K)
• High colour rendering index (CRI 70) improves visibility with reduced glare, increased clarity and better depth perception
• Ultra-low current draw places minimal strain on a vehicle’s electrical system

Striking Appearance, Built to Endure

• Outstanding performance matched to a sophisticated and stylised European design to enhance a vehicle’s appearance
• Built-in ‘Active Thermal Management System’ (ATMS) enables the lamp to run harder for longer
• Proven heavy duty multi-position bracket offering multiple mounting positions to guarantee the perfect fit
• Fully sealed against water and dust ingress (IP67) and utilising an integrated DT Connector for a secure power connection
• Internal heatsink directs heat build-up out via reflector vents to eliminate chances of fog

Technical Information

• Input voltage range        9-33v
• Current draw     3a at 12v
• Power   30 watts
• LEDs    2x 15 watt xhp50.2 CREE LEDs
• Lumens 3,800 raw / 1,663 effective
• LP rating           IP67
• Operating temperature   -10°c to 65°c
• Colour temperature        5000°k
• Size      175mm dia.
• Weight  1.1kg
• ECE     ECE r10
• Other    active thermal management system (atms)
• Other    1 lux at 650m

Ultima 225 L.E.D Combination Driving Light Kit

9-33V Enhanced Optic Driving Lights - 5,700 Lumens ea. Premium styled driving lights utilising the latest in enhanced free form 'Optic Drive™' L.E.D technology to capture and harness the light output for maximum performance. Specifically designed to endure the harshest Australian conditions, they produce a H.I.D like output with all the benefits of L.E.D. The Enhanced Optic range transform everyday 4x4s and SUVs into luxurious escape vehicles.

Class Leading Performance

• The very latest in Cree® XHP50.2 L.E.D chip sets produce an extremely efficient yet powerful white light output (5000°K)
• High colour rendering index (CRI 70) improves visibility with reduced glare, increased clarity and better depth perception
• Ultra-low current draw places minimal strain on a vehicle’s electrical system

Striking Appearance, Built to Endure

• Outstanding performance matched to a sophisticated and stylised European design to enhance a vehicle’s appearance
• Built-in ‘Active Thermal Management System’ (ATMS) enables the lamp to run harder for longer
• Proven heavy duty multi-position bracket offering multiple mounting positions to guarantee the perfect fit
• Fully sealed against water and dust ingress (IP67) and utilising an integrated DT Connector for a secure power connection
• Internal heatsink directs heat build-up out via reflector vents to eliminate chances of fog

Technical Information:

• Input voltage range        9-33v
• Current draw     4.6a at 12v
• Power   45 watts
• LEDs    3x 15 watt xhp50.2 cREE LEDs
• Lumens 5,700 raw / 2,500 effective
• LP rating           IP67
• Operating temperature   -10°c to 65°c
• Colour temperature        5000°k
• Size      225mm dia.
• Weight  2.2kg
• ECE     ECE r10
• Other    active thermal management system (atms)
• Other    1 lux at 730m

12V Explora 175 Driving Lamps - Twin Pack

Sleek, modern and compact, the Explora 175 L.E.D driving lights are the ideal choice for fitment tosmaller vehicles and SUVs. Utilising the latest Advanced ‘Optic Drive™’ technology they produce a crisp, clean and controlled light output that will enhance any vehicle’s factory lighting.

• Virtually unbreakable polycarbonate lens & optional lens protector
• 15W XHP50.2 Cree® L.E.D
• Advanced ‘Optic Drive™’ free form reflectors
• Light weight tough glass reinforced polymer housing
• Pressure die-cast aluminium heatsink
• Pre-wired lead with DT connector
• Nitto breather vent
• Stainless steel bracket & mounting hardware
• L.E.D front position light pipe

Technical Information:

• Input voltage range        12v
• Current draw     1.5a at 12v
• Power   15w
• Leds     15 watt xhp50.2 Cree®
• Lumens 1900 raw, 700 effective
• LP rating           IP67
• Operating temperature   -10°c to 65°c
• Colour temperature        5000°k
• Size      176 x 192 x 97mm
• Weight  600g
• ECE     R10

Features:

• High powered Cree L.E.Ds produce 1800 lumens for light output
• Tilt adjustable stainless steel mounting hardware
• Die-cast powder coated aluminium housings
• Virtually unbreakable polycarbonate lens
• 9-36V multi-voltage
• Fully sealed to IP68
• EMC compliant

Technical Information:

• INPUT VOLTAGE RANGE 9-36V
• CURRENT DRAW 1.3 Amps at 12V (0.6 Amps at 24V)
• LEDs 2x 10W Cree L.E.Ds
• LUMENS 1800 Lumens
• LP RATING IP68
• OTHER EMC Compliant

Features:

• High powered Cree L.E.Ds produce 2000 lumens for light output
• Tilt adjustable stainless steel mounting hardware
• Die-cast powder coated aluminium housings
• Virtually unbreakable polycarbonate lens
• 9-36V multi-voltage
• Fully sealed to IP68
• EMC compliant

Technical Information:

• INPUT VOLTAGE RANGE 9-36V
• CURRENT DRAW 1.6 Amps at 12V (0.7 Amps at 24V)
• LEDs 4 x 5W Cree L.E.Ds
• LUMENS 2000 Lumens
• LP RATING IP68
• OTHER EMC Compliant

Features:

• High powered Cree L.E.Ds produce 1050 lumens for light output
• Tilt adjustable stainless steel mounting hardware
• Die-cast powder coated aluminium housings
• Virtually unbreakable polycarbonate lens
• 9-36V multi-voltage
• Fully sealed to IP68
• EMC compliant

Technical Information:

• INPUT VOLTAGE RANGE 9-36V
• CURRENT DRAW 0.6 Amps at 12V (0.3 Amps at 24V)
• LEDs 5x 3W Cree L.E.Ds
• LUMENS 1050 LUMENS
• LP RATING IP68
• OTHER EMC Compliant

Explora L.E.D Light Bar 14" Single Row and 6000 Lumens & Licence Plate Bracket

9-32 Volt 5 Watt L.E.D Light Bar - Narva's new Explora ultra slimline L.E.D driving light bar features 'Advanced Optic Drive Technology'. The light output from the 12 x 5W high powered L.E.D's is captured and focused to produce a more penetrating light output down the road. The result is a 30% brighter light output than a conventional L.E.D driving light bar, eliminating wasted light output and focusing the light where you need it most. Now available with a Licence Plate Bracket.

• 12 x 5W high power L.E.Ds (5700°K)
• Supplied Licence Plate Bracket enables quick and easy fitment with no need to drill holes
• 9-32V Multi-voltage input suits 12 and 24V vehicles
• One piece diecast aluminium housing -superior heat dissipation and ingress protection
• Virtually unbreakable polycarbonate lens

Technical Information:

• Input voltage range        9-32v
• Current draw     2.6a at 12v / 1.3a at 24v
• Power   60 watts
• LEDs    12 x 5w high power Osram LED
• Lumens 6,000 raw / 2,377 effective
• LP rating           IP68 & IP69k
• Operating temperature   -30°c to 65°c
• Colour temperature        5700°k
• Size      14" or 350mm
• Weight  650g
• ECE     ECE R10
• Other    active thermal heat management system (atms)
• Other    1 lux at 275m

Explora L.E.D Light Bar 22" Single Row

9-32 Volt 5 Watt L.E.D Light Bar - Narva's new Explora ultra slimline L.E.D driving light bar features 'Advanced Optic Drive Technology'. The light output from the 18 x 5W high powered LE.D's is captured and focused to produce a more penetrating light output down the road. The result is a 30% brighter light output than a conventional L.E.D driving light bar, eliminating wasted light output and focusing the light where you need it most.

30% Brighter Than a Conventional L.E.D Light Bar*

Advanced ‘Optic Drive™’ technology captures and focuses more of the light generated from the 5W L.E.Ds to produce a more penetrating light output down the road. Eliminating wasted light output and focusing the light where you need it most results in a 30% brighter output.*

Superior Construction

• One piece die cast aluminium housing designed without end caps provides optimum sealing and heat dissipation
• Virtually unbreakable hard coated polycarbonate lens
• Stainless steel brackets and mounting hardware (SUS 304)
• Fully sealed and submersible (IP68 & IP69K)
• Integrated Genuine Nitto Breather Vent
• Pre-wired weatherproof DT connector
• *Explora L.E.D light bar when compared with a conventional L.E.D light bar of the same length.

Technical Information

• Input voltage range        9-32v
• Current draw     3.7a at 12v / 1.9a at 24v
• Power   90w
• LEDs    18x 5w high power Osram LEDs
• Lumens 9,000 raw / 3,589 effective
• LP rating           IP68 & IP69k
• Operating temperature   -30°c to 65°c
• Colour temperature        5700°c
• Size      22" or 550mm
• Weight  1100g
• ECE     ECE R10
• Other    active thermal heat management system (atms)
• Other    1 lux at 345m

Explora L.E.D Light Bar 22" Double Row

9-32 Volt 5 Watt L.E.D Light Bar - Narva's new Explora ultra slimline L.E.D driving light bar features 'Advanced Optic Drive Technology'. The light output from the 36 x 5W high powered LE.D's is captured and focused to produce a more penetrating light output down the road. The result is a 30% brighter light output than a conventional L.E.D driving light bar, eliminating wasted light output and focusing the light where you need it most.

30% Brighter Than a Conventional L.E.D Light Bar*

Advanced ‘Optic Drive™’ technology captures and focuses more of the light generated from the 5W L.E.Ds to produce a more penetrating light output down the road. Eliminating wasted light output and focusing the light where you need it most results in a 30% brighter output.*

Superior Construction

• One piece die cast aluminium housing designed without end caps provides optimum sealing and heat dissipation
• Virtually unbreakable hard coated polycarbonate lens
• Stainless steel brackets and mounting hardware (SUS 304)
• Fully sealed and submersible (IP68 & IP69K)
• Integrated Genuine Nitto Breather Vent
• Pre-wired weatherproof DT connector
• *Explora L.E.D light bar when compared with a conventional L.E.D light bar of the same length.

Technical Information:

• Input voltage range        9-32v
• Current draw     6.6a at 12v
• Power   180w
• LEDs    36x 5w high power Osram LEDs
• Lumens 18,000 raw / 6,217 effective
• LP rating           IP68 & IP69k
• Operating temperature   -30°c to 65°c
• Colour temperature        5700°k
• Size      22" or 550mm
• Weight  2420g
• ECE     ECE R10
• Other    active thermal heat management system (atms)
• Other    1 lux at 460m

NARVA - Ultima 180 LED Black Bezel - change up the look of your driving lights to sut your vehicle or bar work.

Sold separately.

NARVA Interchangeable Chrome Bezel To Suit Ultima 180 LED Driving Lights

NOTE: This is only suitable for the Ultima 180 LED Driving Light

Ultima 215 LED - Black Bezel

Gloss black bezel suits Ultima 215 LED High Powered Driving Light.

Ultima 215 LED - Chrome Bezel

Chrome bezel suits Ultima 215 LED High Powered Driving Light.

Explora 175 Lens Protector

Hard coated polycarbonate lens protector.

NARVA 3" Bull Bar Mount Brackets (Pair) to suit Explora Single Row LED Light Bar

76.2mm Explora Bull Bar Tube Mount Brackets allow fitment onto most tubular style nudge bars and bull bars.

NARVA 2.5" Bull Bar Tube Mount Brackets (Pair) to suit Explora Single Row LED Light Bar

63.5mm Explora Bull Bar Tube Mount Brackets allow fitment onto most tubular style nudge bars and bull bars.

NARVA 2" Bull Bar Tube Mount Brackets (Pair) to suit Explora Single Row LED Light Bars

50.8mm Explora Bull Bar Tube Mount Brackets allow fitment onto most tubular style nudge bars and bull bars.

Ultima Driving Light Bull Bar Adaptor Plates - Pair.

Suits Ultima 180, 215 and 225 L.E.D Driving Lights.

Sold as a pair.

NARVA 12v Driving Light and Light Bar Harness

A simple and easy to use wiring harness featuring all the necessary components to make wiring up your driving lights fuss free and relatively inexpensive.

Features:

• Pre-wired relay and waterproof fuse holder
• Waterproof Deutsch® type connectors
• Rocker switch with Red L.E.D
• Suitable for either positively or negatively switched vehicles using manual change over leads

NARVA 12v 4WD Driving Light and Light Bar Harness

A ‘Premium’ heavy-duty wiring harness that features easy ‘Plug and Play’ connections for a quick do-it-yourself installation. All the components are high quality fittings to ensure a professional finish and enable tool-free fitment.

Features:

• Off/On switch with L.E.D indicators
• Premium 2-Way Deutsch type waterproof connectors
• Pre-wired relay and waterproof fuse holder
• Inline waterproof fuse holder with 30A fuse
• Supplied with H4 headlamp adaptors
• Supplied with HB3 headlamp adaptors