More info
Free delivery on all orders over $98
Lifetime Warranty on all tested tough products
Afterpay Available - Adventure Now Pay Later
Extended 1 Year Warranty for CAOS Crew
CAOS Bow Shackle, Hitch Receiver and Pin Set.
Convert your standard 50mm x 50mm square towbar hitch into a rated recovery point by simply removing your towbar tongue and replacing it with this hitch.
Suitable for a snatch or winch recovery situation and perfect for those vehicles who have trouble mounting rear recovery points.
You should never, ever use a tow ball for recovery purposes as they are not rated for the loads applied when performing vehicle recovery
This Recovery hitch will replace the tow ball and is rated for the job!
Features:
-
Machined steel hitch receiver with 5 Tonne / 5000kgs working load limit.
-
Corrosion resistant powder coated or zinc plated parts.
-
Moulded plastic bow shackle protector.
-
Twin mounting holes for vertical or horizontal mounting depending on recovery angle.
-
Designed to suit most standard 50mm x 50mm heavy duty towbars.
-
Complete assembly.
WARNING!! Never use a tow ball for recovery purposes.
Note: The distance between the milled shoulder beside the eye and the centre of the pin hole = 76mm; the length of the square part of the receiver that inserts into the towbar = 104mm. Please check that this item will fit your towbar before ordering.
| SKU | 300011002AU |
| Barcode # | 9354486000308 |
| Brand | CAOS |
| Shipping Weight | 3.6210kg |
| Shipping Width | 16.7cm |
| Shipping Height | 7cm |
| Shipping Length | 27.5cm |
| Shipping Cubic | 0.003215000m3 |
| Unit Of Measure | ea |
Awesome quality at a fair price
By: Martin on 23 July 2020Bought one of these hitch receivers and bow shackle for my son's new car. Very impressive package and presentation. Much heavier than my current set up and has the advantage of being slightly shorter in the length that goes into the receiver so if you have an under car spare tyre it will fit without jamming up against your spare tyre. Exactly what we needed. Pin holes drilled on all four sides provides flexibility as to how you want to mount it in the receiver. All round just a great product.
(5)
Solid. Well made. Great value!
By: JohnLobban on 8 June 2020I’ve had a kinetic recovery rope (Bubba Rope) for several years and my SUV has a 2 inch receiver. I ordered this product because it seemed, by far, the best value for the price and I wasn’t disappointed. Two days after receiving this shackle, I had to use my Bubba Rope to pull my church’s industrial mower out of a ditch when I got it stuck. This was so much easier to use than installing my vehicle’s recovery hook. Well made and easy to use!
(5)
Heavy Duty
By: Rob B on 8 June 2020Looks soild ,no complaints
(5)
Works
By: Sebastian on 8 June 2020Would buy again this is a good business to work with and you get a Warranty
(5)
Looks great!
By: Spencer on 5 June 2020Very impressed. Build quality and finish look great. Very nice box it was shipped in. I’m going to keep it stored in the box in wife’s suv. I also like that you can run the shackle vertically or horizontally in the receiver. I’m probably going to replace the one in my truck with this.
(5)
CAOS Bow Shackle, Hitch Receiver and Pin Set.
Convert your standard 50mm x 50mm square towbar hitch into a rated recovery point by simply removing your towbar tongue and replacing it with this hitch.
Suitable for a snatch or winch recovery situation and perfect for those vehicles who have trouble mounting rear recovery points.
You should never, ever use a tow ball for recovery purposes as they are not rated for the loads applied when performing vehicle recovery
This Recovery hitch will replace the tow ball and is rated for the job!
Features:
-
Machined steel hitch receiver with 5 Tonne / 5000kgs working load limit.
-
Corrosion resistant powder coated or zinc plated parts.
-
Moulded plastic bow shackle protector.
-
Twin mounting holes for vertical or horizontal mounting depending on recovery angle.
-
Designed to suit most standard 50mm x 50mm heavy duty towbars.
-
Complete assembly.
WARNING!! Never use a tow ball for recovery purposes.
Note: The distance between the milled shoulder beside the eye and the centre of the pin hole = 76mm; the length of the square part of the receiver that inserts into the towbar = 104mm. Please check that this item will fit your towbar before ordering.
| SKU | 300011002AU |
| Barcode # | 9354486000308 |
| Brand | CAOS |
| Shipping Weight | 3.6210kg |
| Shipping Width | 16.7cm |
| Shipping Height | 7cm |
| Shipping Length | 27.5cm |
| Shipping Cubic | 0.003215000m3 |
| Unit Of Measure | ea |
Awesome quality at a fair price
By: Martin on 23 July 2020Bought one of these hitch receivers and bow shackle for my son's new car. Very impressive package and presentation. Much heavier than my current set up and has the advantage of being slightly shorter in the length that goes into the receiver so if you have an under car spare tyre it will fit without jamming up against your spare tyre. Exactly what we needed. Pin holes drilled on all four sides provides flexibility as to how you want to mount it in the receiver. All round just a great product.
(5)
Solid. Well made. Great value!
By: JohnLobban on 8 June 2020I’ve had a kinetic recovery rope (Bubba Rope) for several years and my SUV has a 2 inch receiver. I ordered this product because it seemed, by far, the best value for the price and I wasn’t disappointed. Two days after receiving this shackle, I had to use my Bubba Rope to pull my church’s industrial mower out of a ditch when I got it stuck. This was so much easier to use than installing my vehicle’s recovery hook. Well made and easy to use!
(5)
Heavy Duty
By: Rob B on 8 June 2020Looks soild ,no complaints
(5)
Works
By: Sebastian on 8 June 2020Would buy again this is a good business to work with and you get a Warranty
(5)
Looks great!
By: Spencer on 5 June 2020Very impressed. Build quality and finish look great. Very nice box it was shipped in. I’m going to keep it stored in the box in wife’s suv. I also like that you can run the shackle vertically or horizontally in the receiver. I’m probably going to replace the one in my truck with this.
(5)
