Front Runner
Refine by Clear all
More infoThe Front Runner Axe Mounting Bracket is a safe and secure option for traveling with your long handled axe.
Bolts slide in to the slot of a Front Runner Slimline II side rail or can be adapted and bolted to other racks or surfaces.
Axe head is protected in steel cage. 2mm (0.078) Black powder coated 3CR12 stainless steel.
Can accommodate most axe sizes.
Read more...
The must have item to experience the full potential of the Front Runner Rack.
These easy to use tie down rings quickly and easily mount to a Front Runner Rack via the t-slots on the top, the bottom, and the side rails of the rack. No tools required. Just hand tighten.
Slide these around anywhere on the rack for an endless supply of tie down points. Perfect for use with the Front Runner Stratchit or any style tie down strap.
Mount unusual loads securely to a Rack for hassle free/rattle free travels where a specific mounting accessory is not available.
Of all the accessories for the Front Runner Slimline II Roof Rack this is THE must have.
Sold in pairs.
Read more...
Front Runner - Camp Kitchen Utensil Set
A high quality kitchen utensil set. Everything you need for cooking and eating can be hung at the campsite and rolls up securely for safe, rattle-free transport.
These are not your typical cheap, and easy to break, "throw away" camp utensils.
The composite handles offer a comfortable and "weighty" grip.
Triple riveted knife handles with double riveted fork and spoon handles.
Professional forged knife blades with black comfort grip poly handles.
The steak knives feature high quality, micro-serrated edges.
Contains:
- 4 x serrated knifes
- 4 x steak forks
- 4 x dessert spoons
- 4 x tea spoons
- 1 x chopping board
- 1 x paring knife
- 1 x bread knife
- 1 x carving knife
- 1 x serving spoon
- 1 x spatula
- 1 x BBQ/Campfire fork
- 1 x Bottle opener and corkscrew
The entire kit fits in a custom tool-style roll with flap, adjustable straps and buckles, and carrying handles. Also features loops with carabiners so the opened roll and utensils can be hung for quick and easy access.
Read more...
A canvas bag that holds two (2) Expander Chairs.
Features:
- Zippered access.
- Two (2) carrier straps to support added weight.
- Black nylon edging for added ridgidity.
- Reduces rattle when travelling.
NOTE: This is for one chair bag only. Chairs sold separately.
Read more...
Front Runner - Quick Release Awning Mounting Kit
If you don't want to keep your awning on your vehicle at all times, Front Runner's Quick Release Awning Mount Kit gives you the freedom to mount or remove your awning in seconds, and with no tools. The 2 lockable latches give you safety and added peace of mind. Once these brackets are installed on a Front Runner Rack, no additional tools are needed to remove or refit the awning. Simply release the 2 latches and lift the awning away in seconds. No more wrenching in tight spaces during the "off-season" or time-consuming weekday removal of the awning.
This strong and "rattle-free" mounting system is built off-road tough for use with Front Runner Racks. Works with all Front Runner Awnings and other popular awning brands like Eezi-Awn, Oz Tent, etc. 2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the awnings mounting channel using the supplied fasteners.
Safely secured in place using 2 latches with built-in safety catch. For added peace of mind, lock your latches in place using Rack Accessory Lock / Small. The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted. No awning modification required.
Removed awnings can be stored using the wall mount brackets supplied. Supplied with all required mounting hardware.
Fitting instructions are included.
Note: Not suitable for 270 degree awnings.
Consists of:
- 1 x Pair of Quick Release Awning Brackets
- Installation Hardware
- Fitting Instructions
Materials used: Black powder coated 3CR12 stainless steel; 316 Stainless steel; 304 Stainless steel
Product Dimensions: (Per assembled bracket) 160mm (6.3") L x 80mm (3.2") W x 105mm (4.1") H Weight: 2.1Kg (4.6lbs)
Read more...
Front Runner - Qucik Release Tent Mounting Kit
Do you have limited garage clearance? Maybe you just don't want to keep the tent on your vehicle at all times. Front Runner's Quick Release Tent Mount Kit gives you the freedom to mount or remove the tent in seconds, and with no tools.
The 4 lockable latches give you safety and added peace of mind. Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent. Simply release the safety catch on the 4 latches and lift the tent away in seconds. No more wrenching in tight spaces.
This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.
Works with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc. Works with hard shell tents such as Autohome/Maggionlina, and James Baroud. Hard shell tent owners please read *IMPORTANT NOTE below.
4 low profile latching brackets bolt to a Front Runner Rack, and 4 self-aligning guide bolts secure to the tent base channels using the supplied nut plates (3 sets of nut plates to work with popular tent channels included)
Secures in place with 4 latches with safety catches. For added peace of mind, lock your latches in place using Rack Accessory Lock / Small.
Tents can be mounted at two different heights, depending on clearance needs. The bottom of the tent can sit either 40mm / 1.57 inches or 17mm / 1 inch above the rack slats. Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack. The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available. No tent modification required.
Removed tents can be stored on the ground, raised slightly off the floor with the stainless steel bobbins. Supplied with all required mounting hardware. Fitting instructions are included.
*IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent
Consists of:
1 x Set of 4 Quick Release Brackets
Installation Hardware
Fitting Instructions
Materials used: Black powder coated 3CR12 stainless steel; 316 Stainless steel; 304 Stainless steel
Product Dimensions: (Per assembled bracket) 261mm (10.3") L x 64mm (2.5") W x 93mm (3.4") H Weight: 4.97Kg (10.9lbs)
Read more...
Fit a bottle opener to your rack for when ever you need to crack open a cool one.
Black powder coated stainless steel for protection against the elements.
Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.
Read more...
Mount a spade/shovel or similar gear up and out of the way on the side of a Front Runner Roof Rack.
These brackets install along the Slimline II Roof Rack Tray side rails in minutes. No drilling required.
Includes hardware to mount to the original Front Runner Slimline Roof Rack.
Can accommodate most shovel sizes and is adjustable to fit gear 1/2'' (12mm) to 2'' (50mm) in diameter.
Read more...
Front Runner - Expander Camping Chair
NOTE: This is for one single chair only. Additional chairs and chair bag sold separately.
Traveling with chairs has always been a difficult task due to their size. Comfort is always the first to go when challenged with an over packed vehicle. Don't be left standing - you won't need much room to bring along the Front Runner Expander Chair. This chair is designed with a new space-saving patent pending technology.This innovative technology allows this full-sized chair to compact to 1/16th its size!
The Front Runner Expander is easily stored in limited space because it folds down to the size of a laptop case.
Use these chairs for overlanding, tailgating, picnics, outdoor concerts, sporting events, etc.
Because the Front Runner Expander is lightweight and compact with a carrying handle, its extremely easy to carry from your vehicle to your destination. The ALL BLACK DESIGN is extremely stylish, matches many vehicle and camping accessories, and stands apart from all other collapsible chairs on the market.
Features:
- Comfortable and extremely portable.
- Folds in 3 easy steps.
- Resists sinking into sand.
- Comfortable table height.
- Constructed of rugged steel.
- A cup holder.
- A media pocket for cell phones, gps, or mp3 player.
- A carry handle.
- A utility pocket, for books, magazine, maps.
Materials used:
Fabric: Black 600D polyester
Frame: Black powder coated steel
Product Dimensions:
Folded: L 61mm (2.4") x W 444.5mm (17.5") x H 417mm (16.4")
Unfolded: L 521mm (20.5") x W 444.5mm (17.5") x H 787mm (31")
Seat Height: 432mm (17")
Load Capacity: 113.6kg (250lbs)
Weight:
4kg (9lbs)
